When you haul gravel, tools, or equipment in your truck bed in Lufkin, the metal floor quickly develops scratches, dents, and rust spots where the paint wears through. A spray-on bed liner bonds directly to the bare metal and creates a thick, textured coating that absorbs impacts and prevents corrosion even when you drag heavy loads across the surface. To the Max Stereo & Accessories preps and sprays bed liners using industrial-grade polyurethane that cures into a durable, non-slip finish within hours of application.
The spray process involves masking off the cab, lights, and tailgate hardware, then sandblasting or sanding the bed floor to remove paint, rust, and any existing coating. Once the surface is clean and dry, we apply multiple layers of polyurethane using a heated spray gun that ensures even coverage and proper thickness. The liner cures to a rubberized texture that grips cargo and resists chipping, peeling, or fading under constant sun exposure.
If your truck bed is showing wear or you want to protect a new vehicle from day one in Lufkin, contact us to schedule a liner application and discuss color or texture options.
The prep work in Lufkin starts with removing any existing bed mat or drop-in liner, then thoroughly cleaning the bed floor to eliminate dirt, oil, and loose rust. We sand or blast the metal down to a rough surface so the polyurethane adheres properly, and we tape off areas that should not be coated such as the tailgate seals, tie-down hooks, and bed rail caps. Once masked, we heat the spray equipment and apply the liner in overlapping passes to build up the desired thickness without creating drips or thin spots.
After the liner cures, your bed floor will have a textured, grippy surface that prevents tools and cargo from sliding around during transport. The coating also seals the metal against moisture, so you will not see rust creeping out from under the liner even after years of use in wet conditions.
The entire process typically takes a few hours from prep to final cure, and you can load cargo into the bed the same day once the liner has hardened. Some customers opt for additional coatings on the bed rails, tailgate, or rear bumper to protect those areas from scratches and corrosion as well.
People usually ask how long the liner lasts, whether it can be repaired if damaged, and what happens if they already have rust or dents in the bed before spraying.
A properly applied polyurethane liner can last the lifetime of your truck if maintained. The coating resists UV fading, chemical spills, and repeated impacts better than paint or drop-in liners, and it will not crack or peel off the bed floor under normal hauling use.
We remove surface rust during prep, but deep rust or large dents should be repaired before spraying to ensure the liner bonds correctly. If the metal is sound, the liner will seal over minor imperfections and prevent further corrosion.
Most spray-on liners in Lufkin come in black with a medium to coarse texture for maximum grip. Some manufacturers offer tintable options in gray, tan, or custom colors, and we can adjust the texture based on whether you want more grip or a smoother finish.
Yes, the textured surface grips cargo much better than bare metal or a smooth drop-in liner. Toolboxes, coolers, and lumber stay in place during normal driving without needing extra tie-downs in most cases.
You can hose out the bed or use a pressure washer to remove dirt and debris. The polyurethane coating resists most chemicals and stains, so basic soap and water will keep it looking clean without damaging the surface.
To the Max Stereo & Accessories applies spray-on bed liners for trucks of all sizes in Lufkin, from compact pickups to heavy-duty work rigs. Reach out to discuss your truck's current condition, preferred texture, and whether you want additional areas coated for complete bed protection.